Connecting Fiber-Optic Cable
To connect the DE500-FA adapter to the network, use the following
procedure:
1.
Remove the dust cap
2
from the SC connector
1
(see Figure 2–4).
2.
Attach the connectors at one end of the cable (
3
,
4
) to the duplex
SC connector ports (
5
,
6
) on your adapter. Note the color coding
of the band (
7
,
8
) that attaches to the top (transmit) side of the
SC connector.
3.
Attach both connectors at the other end of the cable to the other
device. Make sure that the connector noted in step 2 is attached
to the bottom (receive) side of the port on the other device.
4.
Observe the adapter LEDs
9
. The link LED should be a steady
green to indicate connection to an active network.
2–6
