Digital Electronics GP-377 Series, User Manual

Page: 89 / 100

Chapter 6 - GP RUN Mode and Errors
GP-377 Series Users Manual 6-17
Tag Name/ Part ID No. Word Address Tag Format
N1 99 BCD32
Error 1 Error 2 Meaning
191
192
193
194
195
196
197
198
199
0C9 19B
All or part of a T-tag
*1
, S-tag or K-tag address
range overlap the address range set in an A-
tag (Log alarm.)
0C1
0C2
0C3
All or part of the T-tag
*1
or S-tag address
range overlap the addresses of System Data
Area.
All or part of the System Data Area address,
A-tag, or S-tag address range overlap the
addresses setup in a T-tag.
*1
All or part of a T-tag
*1
, S-tag or K-tag address
range overlap the address range set in an A-
tag (Alarm Message.)
n ILLEGAL ADDRESS IN SCREEN DATA
Caused by an overlap of addresses.
After the error message, error codes, as listed below will appear. If the error
cannot be fixed, please report the error code and details on how the error devel-
oped to your local GP distributor.
Overlapping addresses, other than the ones mentioned above, can also cause the
Illegal Address message.
E.g. When the starting address of the System Data Area is set to 100, and the
tag below is setup:
*1 For details about the T-tag (trend graph) and A-tag (alarm messages),
GP-PRO/PBIII for Windows Tag Reference Manual (included with the screen cre-
ation software)
Starting from addresses 99, two(2) words are used, which causes it to
overlap address 100.
ILLEGAL ADDRESS IN SCREEN AREA (00B:XXX:XXX)
Overlapping Addresses
Error No. 2
(Refer to Table
below)
Error
No. 1