Digital Electronics GP-377 Series, User Manual

Page: 70 / 100

GP-377 Series Users Manual
5-22
Chapter 5 - Installation and Wiring
This screen is used to enter the number for the initial screen displayed after pow-
ering up, the character size when in RUN mode, and other general screen items.
INITIAL SCREEN NO.
Set up the screen file number that will display first upon powering up. If the BIN
option for DATA TYPE OF SCREEN NO in SYSTEM SET UP had been se-
lected, enter a number from 1 to 8999. Or, if BCD was the option set up, then
input a number from 1 to 1999.
ALARM MESSAGE
Set up the character size of the ALARM MESSAGE when the Alarm Bulletin is
activated.
ONLINE ERROR DISPLAY
Set up whether or not error messages display during RUN mode.
<When using single-byte characters>
<When using double-byte characters>
V size=4; H size=4
64 × 32 pixels
4
1
V size=1; H size=1
16 × 8 pixels
2
V size=2; H size=2
32 × 16 pixels
V size=1; H size=1
16 × 16 pixels
V size=2; H size=2
32 × 32 pixels
V size=4; H size=4
64 × 64 pixels
5.8 SET UP SCREEN