Digital Electronics GP-377 Series, User Manual

Page: 18 / 100

Chapter 1 - Introduction
GP-377 Series User Guide 1-4
All optional equipment listed below is produced by Digital.
*1 For detailed information about range of connectable PLCs.
GP-PRO/PBIII for Windows PLC Connection Manual (included
with the screen creation software)
n n n n n Available Software
n n
n n n Tool Connector
n n n n n Serial Interface
Product Name Model No. Description
RS-232C cable
*1 GP410-IS00-O
RS-422 cable
*1 GP230-IS11-O
GP230-IS12-O(for Multi-
link)
RS-422 cable
Connector terminal
block conversion GP070-CN10-O Conversion adapter to convert serial data
to RS-422 format.
2 Port Adapter II GP070-MD11 Interface unit that allows use of both GP
and Mitsubishi A,Q, C and FX series
equipment in the same location.
2 Port Adapter II Cable GP070-MDCB11 Connects the GP to 2 Port Adapter II.
Mitsubishi A Series
Programming Port I/F
cable GP430-IP10-O
Mitsubishi FX Series
Programming Port I/F
cable GP430-IP11-O
Interface cable between the host (PLC)
and GP.
Connects directly to Mitsubishi's PLC I/F
Programming Console. Simultaneous
use of program console, however, is not
possible.
1.3 Accessories
Product Name Model No. Description
Screen Data
Transfer Cable
GPW-CB02 Connects the GP to a personal computer.
Transfers screen data and user
program(s).
Memory Loader II GP070-LD01-O Copies data (system and screen data) from
one GP to another GP.
Rev. H or later
Product Name Model No. Description
GP-PRO/PB
III
for
Windows Ver.4.0
or later
GPW-PB01M-V40 <CD-ROM> Software to be used to create the GP's
screen data using a personal computer.