manualshive.com logo in svg

Digital Electronics GP-377 Series, User Manual

Share
Download
Digital Electronics GP-377 Series User Manual Download Page 60

GP-377  Series Users Manual

5-12

Chapter 5 - Installation and Wiring

Touch operation and Force Reset setup, and Display Device adjustments are made
here. There may be diffrences on these settings depending of the GP type.

GP-377L Setup Screen

GP-377S Setup Screen

TOUCH OPERATION MODE

Designates either One Point, Two Point or No Slide. When No Slide is selected,
dragging one's finger across the touch screen will elicit no screen response, and
only individually selected points will register.

SYSTEM RESET MODE

Designates whether or not a SYSTEM RESET operation is performed.

u

u

u

u

u

Steps to run SYSTEM RESET

While holding down the bottom right corner (1) of the screen, press the upper
right corner (2).  At the same time, press the bottom left corner (3) to enter the
FORCE RESET Operation.  To activate Reset, press the 

RESET 

button, to trans-

fer to OFFLINE Mode, press 

OFFLINE

.

!!!!!

5.4.3 SET UP TOUCH PANEL

Summary of Contents for GP-377 Series





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands