Digital Electronics GP-377 Series User Manual Download Page 13

Page: 13 / 100

xiii

GP-377 Series User Guide

Preface

The list below describes the documentation conventions used in this manual.

Documentation Conventions

Symbol

Meaning

Used to indicate situations where severe bodily injury,

death or major machine damage can occur.

Indicates situations where slight bodily injury or machine

damage can occur.

Indicates important information or procedures that must

be followed for correct and risk-free software/device

operation.

Indicates information or procedures that must be

followed to ensure proper software/device setup and

operating conditions.

Indicates actions/procedures the User should not

attempt.

Indicates useful or important supplemental information.

1) , 2)

Indicates steps in a procedure. Be sure to perform these

steps in the order given.
Refers to useful or important supplemental information.

Provides useful or important supplemental information.

GP Screen

Editor

Indicates the GP-PRO/PBIII for Windows screen editor

software.

PLC

Abbreviation for Programmable Logic Controller.

n:1

Indicates a multi-link type connection is used.

Summary of Contents for GP-377 Series





































































































Search results

Summary of Contents for GP-377 Series

Reviews:

Related manuals for GP-377 Series

Brands by name

Popular brands

Digital Electronics GP-377 Series, User Manual

Search results

Summary of Contents for GP-377 Series

Reviews:

Related manuals for GP-377 Series

Brands by name

Popular brands