Chapter 1 - Introduction
GP-377 Series User Guide
1-7
n
n
n
n
n
Internal 2-Port Feature Usage Notes
• To use the Internal 2-Port feature, you will need to adjust your GP’s settings.
For information about these settings, refer to
GP-PRO/PBIII
for Windows PLC Connection Manual
(included with the GP Screen creation
software)
• This feature can be used only while the GP is in ONLINE mode.
• Since the internal 2-Port feature uses the GP’s single tool connector, you will
not be able to use optional equipment which requires the tool connector (i.e. a
Barcode Reader, etc.)
• If you transfer screen data while the GP is in ONLINE mode, the screen
will not change to the data transfer screen automatically. Thus, you will
need to change the screen manually to the OFFLINE mode's [Main Menu/
Transfer] screen.
4.5 Transferring Screen Data
• Peripheral equipment which cannot be connected to the GP's tool connector
(such as a Programming Console) is not compatible with the GP's Internal 2-
Port feature. To use this type of equipment, you will need to use the external 2-
Port Adapter II.
Summary of Contents for GP-377 Series
