Picture 3-16 Tool path display, processing completed
Picture 3-17 Breakpoint Operation
2) Breakpoint operation
3) Start a G code file from a specific line
Note
：
When you click , it will automatically produce a breakpoint. In case of power outage, it
will also automatically record the breakpoint. As the picture 3-17 shows, it begins processing from the 26
th
line
at this time. Picture 3-17 shows the display under the “goto break” status and the display shows the file name.
P r e s s
to enter the 2nd mode. Click
to enter the breakpoint operation. The control-
ler will run from the last record breakpoint.
Click to enter the 2nd mode. When in 2nd mode, click and the Start Line Edit Box will
appear. Insert the line number and click . A syntax check will be performed and the G code will be
operated from your chosen Start Line position See pictures 3-17 to 3-19.
Page -26
Digtital Dream 4 Axis Motion Controller
DDCS V2.1 User’s Manual
