Picture 3-22 SJR value adjusts to 10 under the mode of “step”
Picture 3-23 Enter default F modification mode
The SJR is to adjust the jog speed. In “CONT” mode you can adjust from 0% to 150%.
In “Step” mode you can adjust 0.01mm, 0.1mm, 1mm and 10mm. Use and to adjust and
choose your value. Click on the Axes arrow keys will move the machine this distance once.
3) SJR
4) F Value modification
The F value adjustment the default Feed Speed. Use the key to highlight F.
If you click or an Edit Window will appear Choose your desired Feed speed and
confirm with Enter. See picture 3-23
Page -30
Digtital Dream 4 Axis Motion Controller
DDCS V2.1 User’s Manual
