3
1
:
X axis moves left
；
2
:
Cursor moves left
3
:
Goto Zero function
In “CONT Mode”, the X axis will Continuously move
negative after pressing this key. In “STEP Mode” X
will move negative in steps. When in “Line Editing”
or default F/S value modification, this key moves
the cursor left. When in “2nd Function”, this key has
the goto Zero function.
3
1
:
X axis moves right
；
2
:
Cursor moves right
3
:
X axis select
In “CONT Mode”, the X axis will Continuously move
positive after pressing this key. In “STEP Mode” X
will move positive in steps. When in “Line Editing” or
default F/S value modification, this key moves the
cursor right. When in “home/zero-clearing/ gotoz”,
this key opens the X axis coordinate edit window.
3
1
:
Y axis moves forward
；
2
:
Parameter value increases
3
:
Y axis select
In “CONT Mode”, the Y axis will continuously move
positive after pressing this key. In “STEP Mode” Y
will move positive in steps. When in “Line Editing”
or default F/S value modification, this key increases
the value. When in “home/zero-clearing/ gotoz”,this
key this key opens the Y axis coordinate edit window.
3
3
3
1
:
Y axis move backward
；
2
:
Parameter value decreases;
3
:
Start the current coordinate
0-clearing
1
:
Z axis Plummer block
2
:
Z axis select
3
:
cancel
In “CONT Mode”, the Y axis will continuously move
negative after pressing this key. In “STEP Mode” Y
will move negative in steps. When in “Line Editing”
or default F/S value modification, this key decreases
the value. When you start the 2nd function, this key
has the Ycoordinate function.
In “CONT Mode”, the Z axis will continuously move
positive after pressing this key. In “STEP Mode” Z
will move positive in steps. When in
“home/zero-clearing/ gotoz”, this key opens Z axis
coordinate edit window. This key is also CANCEL key.
1
:
Z axis down
2
:
home
3
:
enter/select
In “CONT Mode”, the Z axis will continuously move
negative after pressing this key. In “STEP Mode” Z
will move negative in steps. This key serves as the
ENTER key and also is the HOME key
4
1
:
A axis rotates in forward direction
2
:
A axis select
3
:
parameter increases
4
:
F/S default select/cancel
4
1
:
A axis rotates in inversion direction
2
:
Probefunction
3
:
Parameter decreases
4
:
F/S default modification
2
1
:
FRO/SRO/SJR/F/S/G
；
2
:
file copy
2
1
：
Second function start
2
：
file paste
2
1
：
mod switch
2
：
file delete
Table 3-1 List of Keys’ function
Keys Icon Function No.
Definition
Notes
In “CONT Mode”, the A axis will continuously move
positive after pressing this key. In “STEP Mode” A
will move positive in steps.
When in “home/zero-clearing/ gotoz”, this key
opens the A axis coordinate edit window.
When in FRO/ SRO/ SJR this key increases the
parameter value. When in F or S, this key switches
between default value or G code value
In “CONT Mode”, the A axis will continuously move
negative after pressing this key. In “STEP Mode” A
will move negative in steps.
When in 2nd function, this key activates the
PROBE.
When in FRO/ SRO/ SJR this key decreases the
parameter value. When in F or S, this key will open
the Editing Window
This switch will highlight the processing parame-
ters FRO/ SRO/SJR/F/S/G54-59-MACH/M3-M11
While in BUSY it can activate FRO and SRO
In File Management this is the COPY key
This key will activate 2nd Mode (goto, zero, home,
probe, goto breakpoint) . In File Management it is
the PASTE key
When in READY, this key changes the Jog mode
from Continuous to Step and MPG control.
In File Management it is the DELETE key
Page -20
Digtital Dream 4 Axis Motion Controller
DDCS V2.1 User’s Manual
