Digital Audio Corporation PCAP II, User Manual

Page: 158 / 164

146
b. Power ON the computer (not the external processor) and
load Windows
.
. Run the PCAP II Master Control program
by double-clicking the icon.
c. On the PCAP II Master Control menu bar, click on the
"Settings" menu bar option.
d. When the pulldown menu appears, click on "BaudRate".
The display will now appear as follows (Figure 6-2):
e. Click on the baud rate setting which corresponds to the
PCAP II external processor DIP switch settings. If any
error messages appear, recheck COM port setting, Baud
Rate setting, connections, and DIP switch settings.
f.
Click on "File", then "Exit" to exit the PCAP II Master
Control program and save the new baud rate setting.
3. After storing the new baud rate by exiting the PCAP II Master
Control program, test the new baud rate as follows:
a. Switch on the PCAP II external processor. Make sure
that the RS232 cable is properly connected between the
external processor and the PC.
b. Double-click on the PCAP II Master Control icon to run
the program.
c. Allow several seconds for the program to load and to
initialize the external processor. The message "COMx is
Figure 6-2 Baud Rate Selection Menu