www.digimerge.com
VCE400 Series QSG_EN_R1 Page 4
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 Digimerge. All rights reserved.
STEP 2
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
- DYNAMIC DNS & MOTION DETECTION SETUP
5
a
Motion Detection Setup
4
Dynamic DNS Setup
CHECK STEP 4 FOR DETAILED
INFORMATION
Press the
“Menu”
Button
Use the Left or Right Arrows to Navigate to the
“Event”
Menu
Move down to
“Event Record”
, Use the
“F-” (auto) or “F+”
(freeze)
keys to set the value to
“On”
This setting will enable the event recording, ie: Internal Pixel
based motion detection or external dry contacts; by default,
this setting is “Off”
Move down to
“Event Message”
, Use the
“F-” (auto) or “F+”
(freeze)
keys to set the value to
“On”
When this setting is enabled, the OSD will display “MOTION”
over the Channel Number, when Motion is detected; by default
this setting is “Off”
Press
“Spot/ESC”
Move to
“Save and Exit”
and press
“status/home/enter”
For the VCE400 to record on Motion (detection) Events, you
will need to follow the Motion Detection Area Setup, and the
Custom Program setup
The information provided in the ‘DDNS Confirmation Email’ needs to
be on hand when completing this section
Press the
“Menu”
Button
Use the Left or Right Arrows to Navigate to the
“Link”
Menu
Move down to
“Dynamic DNS”
and press
“status/home/enter”
Use the
“F-” (auto) or “F+” (freeze)
keys to toggle the
“DDNS”
value
to
“On”
Move down to
“Domain Name”
and press
“status/home/enter”
Use the directional arrows to Highlight the desired letters or numbers,
Press the
“status/home/enter”
to select the letter
Repeat this process until the full domain name is displayed in the
“Do
main Name”
section
To make corrections to the data entered, you can use the “F-“
(auto) or “F+” (freeze) keys to high light the letter in the “Do
main Name” section you want to change/modify, then use the
directional arrows to highlight the letter you want to change it
to, press the “status/home/enter” to change the selected character
Press
“Spot/ESC”
to set the domain name
Move down to
“User Name”
and press
“status/home/enter”
Use the directional arrows to Highlight the desired letters or numbers,
Press the
“status/home/enter”
to select the letter
Repeat this process until the full user name is displayed in the
“User
Name”
section
To make corrections to the data entered, you can use
the “F-“ (auto) or “F+” (freeze) keys to highlight the
letter in the “User Name” section you want to change/
modify, then use the directional arrows to highlight the
letter you want to change it to, press the “status/home/
enter” to change the selected character
Press
“Spot/ESC”
to set the user name
Move down to
“Password”
and press
“status/home/enter”
Use the directional arrows to Highlight the desired letters
or numbers, Press the
“status/home/enter”
to select the
letter
Repeat this process until the full Password has been en-
tered, the
“Password”
section in this menu will not display
the password as it is entered; this is for security purposes
To make corrections to the data entered, you can use
the “F-“ (auto) or “F+” (freeze) keys to highlight the let-
ter in the “Password” section you want to change/modify,
then use the directional arrows to highlight the letter you
want to change it to, press the “status/home/enter” to
change the selected character
Press
“Spot/ESC”
to set the password
Press
“Spot/ESC”
2 more times
Move to
“Save and Exit”
and press
“status/home/enter”
