www.digimerge.com
VCE400 Series QSG_EN_R1 Page 2
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 Digimerge. All rights reserved.
STEP 1
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
* This set-up guide assumes you are connecting cameras (not included) to the Digimerge DVR. Consult
your DVR’s owners manual for alternative DVR connection and/or information to install a hard drive.
1
Connect the cameras (not supplied) to the CH1,
CH2, CH3, CH4 Video Inputs (BNC Inputs)
2
Insert the power cord to the DVR
Your system is now ready to use. Refer to your DVR’s
owner’s manual to learn how to record, playback, use
the search features and all other features available
with this system. Refer to Dynamic DNS Setup (Step
4) for Setting Up Remote Security Monitoring.
NOT INCLUDED - CAMERAS / BROADBAND ROUTER
BACK OF THE DVR
PACKAGE CONTENTS
BACK OF THE DVR
FRONT OF THE DVR
1 - VCE400 Series Digital Video Recorder
1 - Owners Manual & Warranty
1 - Remote controller
1 - Need Help Insert
1 - Power Cord
2 - Power Batteries (AAA Size)
2 - Rack Mount
1 - Quick Installation Guide
1 - VCE400/300 Series DVR software and Support Disk
4
Ensure to turn ON the Power switch (located on the
front of the DVR)
POWER CORD
3
Insert the other end of the Power Cord to an electrical outlet
BACK OF THE DVR
