45
Using the Main Menu
RS485
Configure options for a RS485 controller.
To configure RS485 options:
1. Press the
buttons to select
options.
2. Press the
buttons to change the
values.
•
SYSTEM ID
: Set the system ID from
0~255.
NOTE:
The system ID on the RS485
controller and the system must match in
order for the controller to function
properly.
•
BAUD RATE
: Set the transmission rate
for the RS485 controller: 1200, 2400,
4800, 9600, 19200, 57600.
•
DATA BIT
: Set the size of each bit of data
sent to the RS485 controller: 6, 7, or 8.
•
PARITY BIT
: Set the error checking for the
data to
EVEN
,
ODD
, or
NONE
.
•
STOP BIT
: Set bit for ending a
transmission to
1
or
2
.
3. Press the
button on the remote
control until you see the Save/Exit screen.
Select
SAVE ONLY
or
SAVE AND EXIT
to save your settings.
PTZ
Set the model, speed, and ID for connected
PTZ cameras (not included).
NOTE:
Consult the owner’s manual of your
PTZ camera for more information on
configuring these settings.
To configure PTZ options:
1. Press the
buttons to select
channels. Press the
buttons to
select between
MODEL
,
SPEED
, and
ID
;
press to change pages (
16-channel model
only
).
2. Press the
buttons to change the
values.
•
MODEL
: Select from PCS-SERIES, EZ,
SK-D106, TK-C655/C676, BOSCH,
PELCO P-TYPE/D-TYPE, LPT-A100L,
DMP23, CS-854, DSC-230, SD-290,
VC-C4R, SRX-100B, SPD, and NONE.
•
SPEED
: Select from 1200, 2400, 4800,
9600, 19200, 57600
•
ID
: Select from 0~255.
3. Press the
button on the remote
control until you see the Save/Exit screen.
Select
SAVE ONLY
or
SAVE AND EXIT
to save your settings.
Figure 13.1 RS485 menu
Figure 13.2 PTZ menu