93
Remote Setup
3. Click Clear All to remove motion detection
from all cells. Grid cells should be green.
4. Click the radio button to select the size of
cursor—
1x1
,
3x3
, or
5x5
.
5. Select cells in the grid to enable with
motion detection. Enabled cells should
turn from
green to clear
.
6. Click
OK
to save your grid configuration or
click
Cancel
to exit without saving.
7. To save your settings to your DVR, click
Update to DVR
.
Sensor Input
Configure the sensors connected to the
system. Depending on your model, you can
connect from 4 to 16 sensors.
To configure sensor input:
1. Click the drop-down menu for each
respective channel and select one of the
following:
•
NORMAL OPEN
:
The sensor is open at
normal times.
•
NORMAL CLOSE
:
The senor is closed at
normal times.
•
NOT USED
:
No sensors are connected to
the system (default for all channels)
2. To save your settings to your DVR, click
Update to DVR
.
Figure 25.6 Motion Area Setup
Figure 25.7 Sensor Input options
