118
APPENDIX I: USING LISTEN-IN AUDIO
Listen-in audio allows you to listen to, and record live audio on the system one channel at a time.
You can connect two audio channels (mono) per RCA-female Y-adapter. Use both RCA-female
Y-adapters included with the system to connect up to four audio channels.*
To enable listen-in audio:
1. Connect the included RCA Y-adapter to the Audio In port on the rear panel of the system.
NOTE:
Each audio cable is for a single audio channel,
not
stereo left and right audio from a
single source.
2. Connect audio RCA-male cables from your audio source (i.e. audio capable camera,
microphone) to the RCA-female cables in the Y-adapter.
3. Press the
button to open the Main Menu.
4. Select
RECORD
and press the
button.
5. From the Record menu, select
AUDIO RECORD
and press the
button.
6. Press the
buttons and the
buttons to set Audio Channels 1~4
ON
/
OFF
.
7. Press the
button on the remote control until you see the Save/Exit screen. Select
SAVE
ONLY
or
SAVE AND EXIT
to save your settings.
8. Press the
button on the remote control to switch between audio channels 1~4.
LINE AUDIO / SPEAKERS
(not included)
DVR
RCA Y-ADAPTER*
(RCA female)
* Use two RCA-female Y-adapters to connect up to four audio
channels.
AUDIO CAPABLE CAMERAS
(connect video via octopus cable)*
Figure 35.0 Audio connection diagram