Digifly FMS50MM, User Manual

Page: 13 / 44

4.1.2 Cartographic section
•
In this section of the screen the electronic map is presented
with details depending on scale and type ofC-MAP cartridge inserted.
The cursor position is indicated on the screen by a cross( ).
Aircraft position (
) with the indication of the Course Prediction
(continuous blinking red line). The recorded track can also be
displayed (go to
). The destination waypoint (if
selected) connected to current position by a dotted line. The waypoints
with different symbols , , ;
Information on airports and radio assistance can be displayed by
positioning the cursor on the Airport and
on .
A window will present relevant information taken from Jeppesen data
base. If additional information is present press
, when finished
press to leave.
Control areas are presented by intermittent lines:
_ _ _ _ _ F_ _ _ _ _ = FIR,
_ _ _ _ _ T_ _ _ _ _ = TMA,
_ _ _ _ _ C_ _ _ _ _ = CTR,
_ _ _ _ _ A_ _ _ _ _ = ATZ.
Restricted areas are delimited by dotted lines :
..............R............
Obligatory VFR routes are presented as continuous lines with report
Positions:
ULM surfaces are indicated as an empty circle
.
Minimum altitudes of the sector ( ) are presented in feet with the
following notation = 3700 piedi.
Airports with air strips length below 3000 feet are shown as (the
bar shows airstrip orientation)
Airports with runaway over 3000 feet presented as a filled circle
.
North UP
double clicking
+
SETTINGS/TRACK
ZOOM+
INFO
MENU
MEF
Q
% & .
_∆___∆___
12