manualshive.com logo in svg

DigiDesign Trillium Lane Labs, Manual, Page: 99 / 114

Share
Download
DigiDesign Trillium Lane Labs Manual Download Page 99

Chapter 10: TL Space TDM and TL Space Native

93

Clear 

Clears the IR from the currently selected 

snapshot.

Preferences Mode

Preferences mode is selected using the Prefer-
ences icon at the top of the TL Space window. 
This displays a number of preferences settings 
for TL Space.

Embed IRs in Preset & Session Files 

Enables or 

disables the embedding of IR waveforms in pre-
sets and session file. By default, this is enabled.

PCI Throttle 

Increasing the PCI throttle control 

reduces PCI contention for Pro Tools systems 
when using PCI video capture hardware. For 
more information, see “PCI Bus Contention” on 
page 101.

For most users, this control should not be ad-
justed. This control is only displayed for TDM 
instantiations of TL Space on Pro Tools|24 Mix 
and Pro Tools|HD systems.

Installed IR Packages 

Displays a list of installed 

TL Space IR packages and their versions.

Meters

The Meters display the amplitude of the incom-
ing and outgoing audio signals by channel. The 
number of meters shown will depend on the 
number of input and output channels. Input 
meters may be mono or stereo, and output 
meters may be mono, stereo, quad, or 5.0 chan-
nels. Each meter is marked as either mono, left, 
right, center, left surround, or right surround. A 
logarithmic scale marked in decibels and mo-
mentary peaks are also displayed on the meter. 

The red Clip indicator indicates that audio for 
that channel has exceeded 0 dB in amplitude. 
When a channel has clipped once, the clip indi-
cator remains lit and additional clips will be 
shown by a variation in the color of the indica-
tor. The clip indicator for all channels can be 
cleared by clicking on any clip indicator, or se-
lecting the Pro Tools Clear All Clip Indicators 
command. 

The meters do not function when TL Space is 
used as an AudioSuite plug-in.

Display area, Preferences mode

Meters, stereo input to 5.0 output shown

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments