DigiDesign Trillium Lane Labs, Manual, Page: 101 / 114

Share

86 pages before
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114

Page: 101 / 114

DigiDesign Trillium Lane Labs Manual Download Page 101

Chapter 10: TL Space TDM and TL Space Native

95

IR Browser Edit Menu

The IR browser’s Edit menu contains the follow-
ing commands:

Download TL Space IR Package

Opens a Web

browser to the TL Space online IR library.

Install TL Space IR Package

Installs a new IR

package downloaded from the TL Space online
library (see “Installing TL Space IR Packages” on
page 95).

Import Other IR Folder

Lets you import a new IR

folder in common file formats. By default, the
new IR is given the same name as the selected
folder.

Remove Imported IR Folder

Lets you remove the

currently selected IR folder.

Rename Imported IR Folder

Lets you rename the

currently selected IR folder.

Add to Favorites

Adds the currently selected IR

to the Favorites group at the top of the browser
window.

New Folder in Favorites

Creates a folder in the

Favorites group. Favorite IRs can be dragged and
dropped into the folder.

Rename Favorites Folder

Lets you rename the

currently selected Favorites folder.

Remove from Favorites

Removes the currently

selected IR from the Favorites group. This func-
tion only removes the link in the Favorites
group and does not remove the original IR file
from the system.

Reset to Default IR Library

Resets TL Space to

the default library. This also removes any user
imported IR folder, but does not affect the Fa-
vorites folder, or IR packages installed from the
TL Space online IR library.

Rescan for Files

Forces TL Space to check the

hard drive for new IRs. This is typically required
if new IR files have been copied to the hard
drive. Using the Rescan for Files command loads
new IRs into TL Space without needing to close
TL Space or the Pro Tools session.

Installing TL Space IR Packages

Additional IR packages for TL Space are available
for registered users to download from the
TL Space Online IR Library at:

www.digidesign.com/tlspace/impulselibrary/

These package files are supplied in a lossless
compressed format.

To install a TL Space IR package:

1

In the TL Space IR browser, select

Download IR

Package

from the Edit menu. Your default Web

browser launches and loads the Digidesign TL
Space Online IR Library website (www.digide-
sign.com/tlspace/impulselibrary/).

2

Click

Download

3

Login using your email address and password.

You may need to create a new account if you
have not yet registered TL Space.

4

Click

Continue

.

5

Click

Download

for the IR package you want.

TL Space may pause briefly while it scans
the hard drives to locate IRs or if all folders
are opened at once. The amount of time
taken is proportional to the number of fold-
ers and IRs scanned.

To download IR packages from the
TL Space Online IR Library, you must first
register with Digidesign and create an on-
line profile.

«
...
99
100
101
102
103
...
»

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments