DigiDesign Trillium Lane Labs, Manual, Page: 23 / 114

Share

Page: 23 / 114

DigiDesign Trillium Lane Labs Manual Download Page 23

Chapter 4: TL AutoPan

17

Place

The Place slider adjusts the front/back place-
ment of the panning field. At 0%, the panning
field is centered front/back. At +100%, it is
placed all the way front. At –100%, it is placed
all the way back.

The Place slider is only available with mono-to-
quad and mono-to-5.0 formats, and a left to
right or right to left path selected.

Spread

The Spread slider opens or constricts the field of
panning. At 100%, the spread of the panning
field is at its greatest. At 0%, the spread of the
panning field is completely constricted, and the
sound is centered and stationary (left/right and
front/back).

The Spread slider is only available with mono-
to-quad and mono-to-5.0 formats, and a circular
path (clockwise or counterclockwise) selected.

Panning Source

Click LFO or ENV to select the source for pan-
ning. When the Source is set to LFO, panning is
controlled by the LFO and its controls (see “LFO
Section” on page 18). When the Source is set to
Envelope (ENV), panning is controlled by the
Envelope Detector and its controls (see “Enve-
lope Section” on page 20). The Envelope Detec-
tor can be triggered by the panned audio signal,
or by a side-chain input (see “Using the Side-
Chain Input” on page 22).

Panning Display

The Panning display graphically represents the
panning field and the location of the sound
source within that field.

Sound Location Indicator

This bright yellow light

indicates the location of the sound source.

Panning Field Indicator

This is the grey line on

which the yellow Sound Location indicator
travels and indicates the panning field.

Panner section, mono-to-5.0, clockwise path selected

Panning Source buttons

Panning display, mono-to-5.0, left to right path selected

«
...
21
22
23
24
25
...
»

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments