manualshive.com logo in svg

DigiDesign Trillium Lane Labs, Manual, Page: 48 / 114

Share
Download
DigiDesign Trillium Lane Labs Manual Download Page 48

Trillium Lane Labs Plug-ins Guide

42

Preferences Panel Display and 
Controls

The Preferences panel lets you set the prefer-
ences for TL Drum Rehab. In most cases the de-
fault preference settings do not need to be 
changed.

To access the Preferences panel:

„

Click the Preferences Panel button (see 

Figure 5).

Timeline Buffer Size

The Timeline Buffer Size determines the amount 
of RAM allocated for the Waveform display. If 
you are using TL Drum Rehab on large selec-
tions, you may want to increase the Timeline 
Buffer Size.

Auto-Scroll Time

When there is no Timeline selection in 
Pro Tools, the Auto-Scroll Time preference sets 
the amount of time displayed in TL Drum Re-
hab’s Waveform display during playback. Dur-
ing playback, the Waveform display scrolls in-
crementally by the amount of time specified in 
the Auto-Scroll Time preference.

Tempo Changes

When the Tempo Changes preference is set to 
Show, TL Drum Rehab shows Pro Tools Tempo 
events as green lines with the tempo indicated 
at the top of the Waveform display in the Expert 
panel (see “Waveform Display” on page 38). 
This preference is set to Hide by default.

Figure 5.  Preferences panel

Preferences Panel button

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments