DigiDesign Trillium Lane Labs, Manual, Page: 98 / 114

Share

Page: 98 / 114

DigiDesign Trillium Lane Labs Manual Download Page 98

Trillium Lane Labs Plug-ins Guide

92

Picture Preview Mode

Picture Preview mode is selected using the Pic-
ture Preview icon at the top of the TL Space win-
dow. When selected, Picture Preview mode
shows pictures associated with the IR. For an IR
provided with TL Space, this will usually include
a photograph of the location, and an image with
technical details such as microphones used or
an overview of the microphone setup. Thumb-
nails of images are displayed in the right hand
column. In this mode, the IR browser can be
used to view the associated pictures without
loading the IR itself.

Snapshot Mode

Snapshot mode is selected using the Snapshot
icon at the top of the TL Space window. TL
Space provides ten snapshots available at all
times. Each snapshot stores a separate IR wave-
form and all control settings. Snapshots are op-
timized for quick loading into the convolution
processor, and switching between snapshots is
considerably faster than loading a new IR. Snap-
shot mode allows all ten snapshots to be viewed
as well as the option to select, rename, copy,
paste, and clear snapshots.

The name of the currently selected snapshot is
always displayed in the Info bar at the bottom of
the display area, and can be automated. This lets
you switch reverb settings during playback and
is useful for post production sessions where the
reverb setting may change as the scene changes.

The active snapshot can be selected in one of
two ways. At any time, a snapshot can be se-
lected by using the snapshot menu in the Info
bar. Alternatively, when the display area is in
Snapshot mode, a snapshot can be selected by
clicking the selection area next to the snapshot
name.

Select

Lets you select which snapshot is cur-

rently loaded.

Name

Displays the name of each snapshot. By

default, snapshots are named “Snapshot 1”
through “Snapshot 10.” Snapshots can be re-
named by clicking on the snapshot name and
entering a new name followed by the Enter key
(Windows) or the Return key (Macintosh).

Sample Path

Displays the name of the IR se-

lected for each snapshot.

Copy

Copies the currently selected snapshot set-

tings into a clipboard.

Paste

Pastes the clipboard into the currently se-

lected snapshot. Note that the name of the ex-
isting snapshot is not changed by pasting a new
snapshot, in order to avoid duplicate snapshot
names.

Display area, Picture Preview mode

Display area, Snapshot mode

«
...
96
97
98
99
100
...
»

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments