Trillium Lane Labs Plug-ins Guide
34
Triggering Controls
Listen
Enable the Listen button to “listen” for
triggers in TL Drum Rehab. When Listen is dis-
abled, TL Drum Rehab only plays back Commit-
ted triggers (see “Commit” on page 36). For
most uses of TL Drum Rehab, Listen is enabled.
No Latency
Enable the No Latency button to
play back committed triggers with 0 samples of
latency. No Latency mode ensures sample accu-
rate drum replacement. This is useful when De-
lay Compensation is disabled in Pro Tools (
Op-
tions > Delay Compensation
), or for use with
Pro Tools LE or lower versions of Pro Tools that
do not provide Delay Compensation. When No
Latency mode is enabled, only committed trig-
gers play back and Listen is deactivated.
Playback Controls
The Trigger panel provides global playback con-
trols for input gain (track audio), sample play-
back gain, ducking, dynamics, and A/B blend.
All playback controls can be automated.
Input
Controls the playback gain of the source
track audio. This is like a Dry Mix control. The
range of the Input control is between –40 dB
and +20 dB.
Samples
Controls the playback gain of samples
loaded into Velocity Zones. This is like a Wet
Mix control. The range of the Samples control is
between –40 dB and +20 dB.
Ducking
Controls the amount of gain reduction
applied to the input audio when a sample is trig-
gered. This is like a balance control, letting you
adjust exactly how much the track’s audio is
suppressed by the samples triggered by TL Drum
Rehab. The range of the Ducking control is be-
tween –40 dB and 0 dB.
Dynamics
Controls the dynamic response of
sample playback and scales the playback veloc-
ity of the triggered sample to the detected am-
plitude of the audio on the track. The range of
the Dynamics control is between 1% and 100%.
When the Dynamics control is all the way to the
left, it is off and samples play back at their orig-
inal amplitude with no gain scaling. The Dy-
namics control is especially useful if you are trig-
gering a single sample or only a few Zones, but
you want more dynamic response on playback
than the number of Zones and loaded samples
provide.
A/B Blend
Controls the mix between samples
loaded into Positions A and B in the Samples
panel (see “Position A/B” on page 40). For exam-
ple, Position A could have one center hit snare
sample and position B could have another cen-
ter hit snare sample of a slightly different color.
Mixing between the A and B positions helps give
triggered samples a fuller sound by blending al-
ternate samples.