DigiDesign Trillium Lane Labs Manual Download Page 7

Page: 7 / 114

Chapter 1: Introduction

chapter 1

Introduction

Welcome to the Trillium Lane Labs® plug-ins
for Pro Tools|HD

, Pro Tools LE

, and VENUE

systems (brought to you by Digidesign

), as well

as Avid Xpress

, Avid Xpress DV, and

Avid DNA™ systems.

Digidesign Trillium Lane Labs plug-ins include
the following:

Free Trillium Lane Labs Plug-ins:

The following plug-ins are installed with
Pro Tools:

• TL InTune™

• TL MasterMeter™

• TL Metro™

Paid Trillium Lane Labs Plug-ins:

• TL Aggro™

• TL AutoPan™

• TL Drum Rehab™

• TL EveryPhase™

• TL Space™ TDM and TL Space Native

Contents of the Boxed
Version of Your Plug-in

Your plug-in package contains the following
components:

• Installer disc

• Digidesign Registration Information Card

• One of the following authorization cards for

authorizing plug-ins with an iLok USB Smart
Key (not supplied):

• Activation Card with an Activation Code

(for authorizing plug-ins with an iLok USB
Smart Key, not supplied)

– or –

• License Card (for authorizing plug-ins with

an iLok USB Smart Key, not supplied)

References to Pro Tools LE™ in this guide
are usually interchangeable with Pro Tools
M-Powered™, except as noted in the
Pro Tools M-Powered Setup Guide.

Summary of Contents for Trillium Lane Labs



















































































































Search results

Summary of Contents for Trillium Lane Labs

Reviews:

DigiDesign Trillium Lane Labs, Manual, Page: 7 / 114

Search results

Summary of Contents for Trillium Lane Labs

Reviews: