DigiDesign Trillium Lane Labs, Manual, Page: 25 / 114

Share

Page: 25 / 114

DigiDesign Trillium Lane Labs Manual Download Page 25

Chapter 4: TL AutoPan

19

Single

When the Single trigger is selected, the LFO will
cycle thru the waveform once only and then
stop.

Beat Clock

When the Beat Clock trigger is selected, the LFO
synchronizes to MIDI Beat Clock. TL AutoPan
receives Beat Clock signal every 64th-note. The
Duration menu determines how often the Beat
Clock signal triggers TL AutoPan, ranging from
every 16th-note to every 4 bars. When Beat
Clock signal is received, the Beat Clock trigger
light blinks brightly. Using the Beat Clock func-
tion enables TL AutoPan to produce consistent
panning results, ensuring that the LFO is always
in the same state at each beat.

Envelope

When the Envelope trigger is selected, the LFO
is triggered directly by the Envelope Detector,
which analyzes the amplitude of the audio sig-
nal. If the Side-Chain Input selector in the Enve-
lope section is activated, then the side-chain au-
dio signal is used instead. When activated, the
Envelope light blinks brighter when an audio
signal is detected. The threshold level can be ad-
justed using the Threshold control in the Enve-
lope section.

If the Envelope Detector is completely released
due to previous portions of the audio signal go-
ing above threshold, a trigger occurs the next
time the audio goes above the threshold level.
Another trigger will not happen until the Enve-
lope Detector has completely released after the
audio goes below the specified threshold. In-
creasing the release time reduces the rate at
which triggers can occur and decreasing the re-
lease time increases the rate at which triggers
can occur.

Manual

When the Manual trigger is selected, the LFO is
triggered manually. This can be especially useful
if you want to trigger the LFO using Pro Tools
automation.

With control surfaces and automation, the
Manual trigger acts like an on/off switch and
triggers the LFO every time it changes state.

Tempo Controls

Link To Tempo

When the Link To Tempo option is enabled, the
LFO rate is set to the Pro Tools session tempo,
and any tempo changes in the session are fol-
lowed automatically. In addition, the LFO rate
slider is ignored and the tempo displayed in the
LCD always displays the current session tempo.

Tempo controls

«
...
23
24
25
26
27
...
»

Summary of Contents for Trillium Lane Labs



















































































































Reviews:

No comments