digico D5T, Operation Manual

Page: 82 / 166

4-15
Chapter 4
A list of all the connected channels and their names is displayed above each Control Group display, touch the area above the Clear button
to expand this list.
When a fader is touched it is highlighted in the list.
You can also clear all the channels from a Control Group by pressing
Clear .
When a channel is a member of a Control Group, its own controls can still be adjusted independently of the other Group members.
Adjustments to fader levels are transmitted to the Group members as dB changes, so that a level increase of 2dB on the Group fader will
increase all the member levels by 2dB, irrespective of the relative levels of the individual channel faders.
4.4.2 Naming Control Groups ......................................................
Like inputs or busses, Control Groups can be named by touching the name display on the screen (default CG1, CG2 etc), and typing a
new name on the console keyboard.
4.4.3 Mode Option .........................................................................
Successive presses of the Mode button above the control group’s label allows the control group to function in one of three different ways:
Moving - The default mode where the input channel faders move to reflect any adjustment made with the Control Group fader.
VCA - The Control Group fader controls the level of an input channel without moving the channel’s fader.
Mutes - Only Input Channel Mutes are affected by the Control Group, not faders.
4.4.4 Auto-Mute Option .................................................................
With Auto-Mute on, any Control Group member which is removed from the group will be automatically muted and any member that joins a
group will be automatically unmuted.