digico D5T, Operation Manual

Page: 121 / 166

Chapter 6
6-11
Fader Changes and Mute On/Off Events
For each channel, the Automation Editor shows the fader position and Mute status as follows:
Areas which are coloured red are Muted, and areas which are coloured blue are un-Muted. Each change in the height of the blue/red area
represents a fader movement.
Input Gain Events
Input gain events are shown in the INP drop down menu in the following way:
Stereo Panning Events
Pan is shown as follows:
The line represents the movement of the pan with time. As it goes towards the top the pan is moving to the left.
Surround Pan Events
In Surround consoles, there are two dimensions of motion for the pan position:
The first line is identical to stereo panning, except that obviously when the line is in the centre of the display the signal is only going to the
C bus. The second line shows the Front-Back positioning. To duplicate the panning of one channel on another you should copy both lines
together.
Sub and Divergence Events
These events are included in the Pan drop down menu (see diagram above).
Sub and Divergence levels are shown in the normal way but the Sub Mode is indicated as a switch in the Sub Level line where different
colours represent each mode:
Black = Sub Off (LCRSS on)
Dim magenta = Sub Only (LCRSS off)
Bright magenta = All on (LCRSSB on)
Aux Send Events
Aux sends and their mutes are automatable in the same way as channel faders and mutes: