manualshive.com logo in svg

digico D5T, Operation Manual

Share
Download
digico D5T Operation Manual Download Page 15

Chapter 1

1-5

1.2.2 The DiGiConfig Program .....................................................

The following example shows how to run the DiGiConfig program from the D5T software in order to configure you hardware:

1)

 Open the 

System / Service

 menu.

2)

 Press the 

Configure Hardware

 button, the D5T software will close and DiGiConfig will open.

3)

 Press the relevant buttons for all the consoles that you wish to configure.

The example below shows the settings for a system with a Main Front of House console and its Redundant Engine, a  Monitor console and
its Redundant Engine and a Remote Controlller or Theatre Controller for the Front of House console.
All the devices should have all of the components of the system selected but the “

THIS ONE?

” button should be selected according to

which device you are setting up.

4)

 This will apply the correct configuration but the details can be further edited by pressing the 

Edit Details

 button.

5)

 Press 

OK

 to return to D5T software.

FOH Main Console

Summary of Contents for D5T







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands