Dietz 720001, User Manual

Page: 48 / 172

48
DIETZ GmbH // User manual, XXL products / tauron|dtrs // Version 1.0 EN
3 PREPARING THE PRODUCT FOR USE
3.6 SEAT HEIGHT
1. To adjust the seat height, undo and remove
the bolts from the telescopic legs (1, Fig. 15).
2. You can now set the telescopic legs to the
OBNRFOBAÐIBKDQEÐ Ð#FDÐ ÐBKPROFKDÐQE>QÐ
the holes of the inner and outer tubes are
aligned with each other.
3. Finally, reinsert the bolts, attach the nuts
BUQBOK>IIVÐ>KAÐQFDEQBKÐQEBJ
WARNING
1HRJç NEç SQ@OOHMF
Ð BÐ @>OBCRIÐ LCÐ VLROÐ ÄÐKDBOPÐ
when adjusting the telescopic legs.
1HRJçNEçSHOOHMF
Adjust all 4 telescopic legs to
the same length.
1HRJç NEç @BBHCDMSç
Make sure the bolts are
ÄÐOJIVÐPB>QBAÐ
2
1
Abb. 15
3.7 HEIGHT-ADJUSTABLE LEG RESTS (OPTIONAL)
If you opt for this type of leg rest, you can adjust
its height to one of 3 settings in increments of
25 mm.
1. Undo the fastening bolt (1, Fig. 16) and
put it aside somewhere safe. You can now
remove the foot plate.
2. Ð0BIB@QÐQEBÐOBNRFOBAÐEBFDEQÐ Ð#FDÐÐ>KAÐ
use the fastening bolt to secure the leg rest
in the selected position (1, Fig. 16).
WARNING
1HRJç NEç SQ@OOHMF
Ð BÐ @>OBCRIÐ LCÐ VLROÐ ÄÐKDBOPÐ
when adjusting the leg rest.
2
1
Abb. 16