Dietz 720001, User Manual

Page: 45 / 172

45
DE
EN
NL
FR
IT
ES
SE
FI
DK
3 PREPARING THE PRODUCT FOR USE
4. Align the side elements so that they are
parallel with each other (Fig. 5). Working
COLJÐQEBÐCOLKQ ÐFKPBOQÐ>Ð?LIQÐ*ÐUÐÐJJÐ
into each side element on the left and right
Ð#FDÐÐ1EBKÐPB@ROBÐQEBJÐÄÐOJIVÐTFQEÐQEBÐ
knurled nuts on the rear of the product
(2, Fig. 5).
5. To adjust the seat width so that it is right for
you, proceed as follows: Loosen the knurled
nuts on the rear of the backrest cushion
(1, Fig. 6). Tilt the backrest cushion down
QLT>OAPÐQEBÐÅÐLLOÐ Ð#FDÐÐ
6. The bolts on the rear of the cushion are now
readily accessible and can be easily pulled
out of the cushion (1, Fig. 7).
7. The middle section inside the backrest is
now free to move. There are three holes on
B>@EÐPFABÐCLOÐPBQQFKDÐQEBÐOBNRFOBAÐPB>QÐTFAQEÐ
(560/630/700 mm). To adjust the width, pull
the side elements outwards (1, Fig. 8). When
adjusting the seat width, make sure that the
backrest remains centrally aligned.
8. ÐÐ,K@BÐVLRÐE>SBÐPBIB@QBAÐQEBÐOBNRFOBAÐPB>QÐ
width, reinsert the bolts and secure them
with the knurled nuts.
9. Finally, swivel the leg rest forwards (Chapter 4.5).
2
2
1
1
Abb. 5
1
2
Abb. 6
1
Abb. 7
1
1
Abb. 8