Operation
5.1
5.1
T/SOP
To use T/SOP, press the wrench button on the external control unit (External Control Unit) and follow the
instructions on the rear service display.
5.1.1
5.1.1
Startup and Shutdown
5.1.1.1
5.1.1.1
Shutting down the System
NOTE
Current transactions
A transaction that is still running (for example, payment to a customer) is completed be-
fore the system is completely shut down.
Figure 5-1:
Turning off the System
ü
Gain access to the external control unit ("see
chapter "Description, section "System over-
view").
1.
Press the "On / Off" button on the external
control unit (see chapter External control
unit).
C
The "System LED" goes off as soon as the
system has been shut down.
NOTE! System shutdown may take a few sec-
onds depending on operating system and run-
ning transactions.
Copyright © 2021, Diebold Nixdorf
01750332558 D
5-2