DIEBOLD NIXDORF DN 470 Series Operator'S Manual Download Page 116

Page: 116 / 125

Maintenance

-0

Figure 6-4:

Opening the Display

Display

Green display handle

Green display latch pin

Coin chute latch pin touch point (if present)

Use the green display handle (not the latch pin) to move the display to the open position. Open the
display to 45°, it won't open any further.

Spray a lint free fine fiber cloth with cleaning solution.

CAUTION

Do not spray the cleaning solution inside of the display area. Always spray the so-
lution on the lint free fine fiber cloth.

Softly clean the display and touch screen.

CAUTION

Be very careful when cleaning the touch screen. The back side can be easily
scratched.

Use a clean dry lint free fine fiber cloth to dry the surface.

6-5

Summary of Contents for DN 470 Series























































































































Search results

Summary of Contents for DN 470 Series

Reviews:

Related manuals for DN 470 Series

Brands by name

Popular brands

DIEBOLD NIXDORF DN 470 Series, Operator'S Manual

Search results

Summary of Contents for DN 470 Series

Reviews:

Related manuals for DN 470 Series

Brands by name

Popular brands