Safety
•
Note that there are only safety extra-low voltage circuits (SELV circuits) if you want to feed voltage
from an external source into prepared cables to install additional electronics (e. g. EMA connection).
•
To clean the system only use cleaning agents approved by Diebold Nixdorf (see chapter "Cleaning,
Service and Maintenance" in the operating manual).
•
Components with adjustable light effects are integrated in this product. Repetition frequencies be-
tween 5 Hz and 40 Hz should be avoided as certain light frequencies or flickering light sources can
cause epileptic seizures in some individuals.
Also avoid light reflections and synchronize the cycles wherever possible. Ensure that monitors' re-
fresh rates are as high as possible.
Repairs
DANGER
Repair work on the system or on the components may be carried out only by authorized
specialist staff. Unauthorized opening of the system or repair work carried out improperly
could result in considerable danger to the user. In case of noncompliance, excludes all lia-
bility.
Lithium batteries
DANGER
Danger of fire and explosion
The handling and replacement of batteries should only be performed by authorized per-
sonnel trained by .
There is a risk of fire or explosion if the batteries are handled improperly. It is therefore im-
portant to note the following points:
l
Avoid short circuits
l
Never recharge the battery
l
Avoid temperatures above +100°C (+212°F).
l
Do not attempt to open the battery by force
l
Do not allow the battery to come into contact with water or fire
l
The battery should only be replaced with the same or an equivalent type recom-
mended by (see chapter “Appendix,” section “Consumables” in the operating man-
ual). Dispose of used batteries in compliance with national regulations and the manu-
facturer's specifications.
Copyright © 2021, Diebold Nixdorf
01750332558 D
2-3
