Operation
5.8
5.8
Accessing the Safe
There are many types of safes and safe locks available for the system and is dependent upon customer
requirements. The safe and locks discussed in this manual are the most commonly used among our cus-
tomers.
Mechanical Keylock
A removable key may be used to unlock the safe door lock bolt. Then the handle is turned to open the
safe door. A mechanical keylock can also be used before entering the combination for the combination
lock.
Mechanical Combination Lock
This lock requires a combination to be entered manually through the lock dial. When the code is suc-
cessfully entered, the lock dial is turned to the right to release the lock bolt. Then the handle can be
turned to open the safe.
Safe Opening Handle
Safe opening handles are present with single mechanical combination locks and with electronic combi-
nation locks. Safe opening handles are used to release the safe door after you enter the correct combi-
nation on the mechanical combination lock or electronic combination lock keypad.
5.9
5.9
Accessing the Coin Dispenser
Perform the following steps to access the coin dispenser tray.
1.
Unlock and open the upper chassis rear door (refer to
2.
Release the latch for the mounting tray (see
).
3.
Use the mounting tray green handle to extend the tray to the service position (see
The coin dispenser is now accessible.
4.
Perform the necessary maintenance activity. Refer to the module operating manuals listed in
for specific maintenance procedures for the module.
5.
Push the coin dispenser tray back into the system until it latches securely in place.
6.
Close and lock the upper chassis rear door (refer to
).
Copyright © 2021, Diebold Nixdorf
01750332558 D
5-24
