SM-200 TE Grinding and Honing Machine
66
Servicing and Maintenance
10
Tension the ribbed belt if there is insufficient torque on the grinding
belt or polishing wheel.
1
Pull out the mains plug on the SM-200 TE.
2
Set the On/Off switch for the abrasives to position
0
(OFF).
3
Remove the screws from cover plate.
4
Remove the cover plate.
5
Loosen the screws on the idler pulley.
6
Press and hold the idler pulley upwards.
7
Retighten the screws on the idler pulley.
8
Replace the cover plate.
9
Retighten the mounting screws on the cover.
10
Plug in the mains plug on the SM-200 TE.
10.7 Readjusting the V-belt
.
Tension the V-belt if there is insufficient torque on the grinding
wheel, grinding belt and polishing wheel.
NOTE
Switch off the grinding and honing machine SM-200 TE and pull
out the mains plug before working on the ribbed belt.
Figure 10.9 –
Tensioning the V-belt
[1]
Clamping screw
1
Summary of Contents for SM-200 TE
Page 76: ......