SM-200 TE Grinding and Honing Machine
61
Servicing and Maintenance
10
3
Press the
I
(ON) button on the main On/Off switch.
4
Set the On/Off switch for the abrasives and the On/Off switch
for the cooling water to position
I
(ON).
5
Pivot the dressing tool over the grinding wheel. Adjust the
knurled screw so that the dressing diamond touches the disc.
6
Move the dressing tool over the grinding wheel by hand.
Slightly adjust the knurled screw with the other hand with
every pivoting action.
7
Continue this dressing process until the grinding wheel is
clean and smooth.
8
Round the upper edge of the grinding wheel after the dressing
process. Use a dressing stone (accessory) to do this.
10.3 Changing the grinding wheel
Replace a worn or damaged grinding wheel immediately.
NOTE
• Never dry dress the grinding wheel.
Figure 10.5 –
Changing the grinding wheel
[1]
Grinding wheel
[2]
Hexagon socket screw
[3]
Clamping flange
2
1
3
Summary of Contents for SM-200 TE
Page 76: ......