Abacus junior 5
User’s Manual
53
7.5.1.1 Troubleshooting guide for printing problems
Problem Possible
reasons/remedies
Printer does not respond,
no printout.
•
Printer is off. Turn it on.
•
Printer is not connected to analyzer.
Connect it to the parallel or USB port of analyzer.
•
Printer is not on-line. Switch it to on-line mode.
•
Printer is out of paper. Load paper.
Strange signs or letters
appear on the printout.
•
The selected printer type does not match your printer.
Select different driver in
Printer settings
.
•
Printer is not set up properly for HP or Epson
(or compatible) mode. Modify the printer setup.
Consult the printer’s manual.
Right side of the printed
report is missing or appears
on the next line.
•
Decrease
Margin
settings in Printer Settings.
•
Try
changing
Mode
to a smaller printout.
The printed report is too
small with excess space on
the paper.
•
Try
selecting
Mode
to a larger printout.
The end of the printout
appears on the next page.
•
Enter the correct
Paper
size.
•
Try
increasing
Margin
.
One more patient report
could fit on the same page.
•
Enter the correct
Paper
size.
•
Decrease
Margin
,
Top margin, Vertical spacing
.
The printed result is not
centered horizontally.
•
Modify
Left margin
.
The printed result is not
centered vertically.
•
Modify
Top margin
.
The distance between two
results is too small or too big.
•
Modify
Vertical spacing
.
After printing, the printer
does not eject the paper.
•
Common in bubble-jet or laser printers.
Do not repeat printing.
When the page is full, or you leave the menu, the
printer will eject the paper automatically.
