JetBox-FloydSC User Manual rev 0.1
Page 35
15. SPECIFICATIONS
Features
Jetson Module
Jetson Nano or Jetson Xavier NX
Cooling Accessory
Integrated heat spreader solution
Display
1x HDMI 2.0a/b
1x Display Port 1.2a
(Module Dependent)
Camera Interface
3 x2 lane CSI-2 camera interfaces
CAN Interface
1x CAN 2.0 Non-isolated transceiver standard, isolation optional
consult factory (
Module dependent
)
Digital I/O
8x Digital IOs obtained through I2C GPIO expander
Ethernet
2x 10/100/1000 Mbps RJ45 with built-in magnetics and LEDs
(
Module dependent
)
Mass Storage
1x M.2 2280 or 2242 M-Key x4 Lane PCIe socket
Serial ports
1x RS-232
1x RS-232/485
USB Ports
2x USB 2.0
1x USB 3.0
Utility
Force recovery, Power button, Reset, Debug UART, Force off, I2C
(3.3V), SPI (3.3V)
Digital I/O Specifications
Device
PCA9535PW
Number of Lines
8
Direction
Programmable bit by bit
Logic Levels
3.3V/5V jumper configurable
Pull resistors
10K ohms +/-1%; Jumper-selectable pull-up/down
Input Voltage Thresholds
Logic 0
-0.5V min, 0.99V(3.3V VIO), 1.5V(5V VIO) max
Logic 1
2.64V(3.3V VIO)/ 3.5V(5V VIO) min, 5.5V max
Output Voltage Thresholds
Logic 0
0.0V min; 0.7V max @ 10mA output current
Logic 1
2.5V(3.3V VIO)/4V(5V VIO) min @ -10mA output current; 3.3V/5V max
Mechanical and Environmental Properties
System Input Voltage
7-24VDC; Absolute Max input voltage = 26VDC
FloydSC Carrier Board
Dimensions
L 4.33
” x W 3.34” (110 mm x 85 mm)
JetBox-FloydSC Dimensions
L 4.88” x W 3.91” x H 2.2” (124mm x 99.48mm x 56mm)
Weight
TBD
Operating Temperature
-25°C to +70°C ambient
RoHS
Compliant
