JetBox-FloydSC User Manual rev 0.1
Page 31
Figure 16 Recovery Mode Terminal Screen
Software Setup
Follow the steps provided below corresponding to the installed module.
Flashing Jetson Nano Module
1. Download the BSP Image file dsc-bsp-fsc-nano-release-2.0-20210707.tar.gz, from the FTP site and copy
it to a directory on the Linux Host Machine.
Alternatively, the file may be copied to a different source such as the Desktop.
Issue the following command to navigate to the directory containing the downloaded file:
cd ~/Desktop
2. To unzip the copied Image file, issue the following command depicted below:
sudo tar -pxvzf 8512610_A_BSP_FSC_LNX_4.9.201_AARCH64_NAO_L4T32.5.1_V1.0.tar.gz
It may take a few minutes for the file to unzip.
NOTE:
The tar.gz file name is liable to change according to the version and release date.
3. To switch to the directory where the file has been extracted. issue the following command as depicted
below:
cd Linux_for_Tegra
