MODEL BGS-250 GRINDER
SECTION 7
MAINTENANCE
47
Grinding & Polishing
OPERATING MANUAL
DECEMBER 2008
Figure 7.5.6a
Step 6 – 110V 50 Hz / 230V 50 Hz / 400V 50Hz Machines:
Unscrew adapter plate (1) and remove spacer rings (2). Unscrew flexible
coupling (3). Remove bolt (4). Remove the coupling (6) with a pulley puller.
When you do this: screw a M10 bolt into the motor shaft. This prevents
damage to the thread inside the motor shaft. Unscrew the nuts (7) to remove
the motor. Unscrew bolts (10) to remove the lifting handle.
