MODEL BGS-250 GRINDER
SECTION 7
MAINTENANCE
43
Grinding & Polishing
OPERATING MANUAL
DECEMBER 2008
Assembly
1.
Clean the adapter grinding disc thoroughly.
2. Adjust
the
grinding
disc in the centering.
3.
Set in and tighten the countersunk head screw.
4.
Remove the block and tilt the machine forward.
When replacing the grinding disc, or at least after the use of 2-3
discs, check the condition of the coupling and also of the adapter
of the grinding disc.
Always replace any worn parts.
Use of non-original replacement components or wear parts may
void the machine warranty.
