MODEL BGS-250 GRINDER
SECTION 4
TRANSPORT
27
Grinding & Polishing
OPERATING MANUAL
DECEMBER 2008
Figure 4.3.1a
Figure 4.3.1b
If the machine is to be transported by a crane or a fork lift, verify that the lifting
strap(s) has sufficient capacity to support the weight of the machine (the gross
weight is shown in Section 4.1 Unit specifications).
Fasten any lifting slings to the points (2) on the machine frame. These points are
NOT suitable as a fixing point for fastenings or tie-downs, during transportation of
the machine on a vehicle.
4.3 TRANSPORT WITH CRANES OR LIFTS
1
1
2