MODEL BGS-250 GRINDER
SECTION 8
ELECTRICAL SYSTEMS
52
Grinding & Polishing
OPERATING MANUAL
DECEMBER 2008
To identify electrical components refer to the electrical schematics in Section 8,
as appropriate, or call a Diamatic service center.
8.1 DIRECTIONS FOR ELECTRICAL ENGINEERING
Work on electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under
the guidance and supervision of a skilled electrician as well as in
accordance with the electrical engineering regulations.
The results of all electrical repair work must be verified using the
appropriate measurement techniques per the regulations stated
in the European VBG4 and VDE 0701 standards or per the
applicable U.S. guidelines, as appropriate. See also Section 5.2
Initial operation.
