37
13.1 Setting Target Values
To access the screen where QC material parameters can be set (Figure
13.1), tap the ‘Settings’ item in the QC main menu. Eight different QC
materials are stored by the software.
Figure 13.2 - QC Selection Screen
When tapping a control material, the Control definition menu is displayed.
To enter the name, LOT number and the date of expiration (year/month),
tap the ‘Name’ button, which is located on the top of the screen. Target
values may be set for four different tests per control material. QC data
may be entered manually based on the QC data sheet provided, or by
reading them in using a barcode reader line by line.
When tapping a test button, the corresponding target value definition
screen is displayed. Keep tapping the name button until the desired test
name is displayed in abbreviated form, and then the minimum and maxi-
mum values of accepted QC range may be entered. The unit of measu-
rement is indicated (which is defined in the Setup menu), except for the
Dimension value.