29
The actual Measurement Screen contains the following elements:
Figure 10.3 - Measurement Screen
Sample Identifier (ID)
This line shows the sample ID of the current sample in measurement
position.
Time counter (sec)
It displays the time of incubation, coagulation or measurement counted
in seconds.
Status row
It shows the actual status of the measurement process or the required
action from the user.
The system always displays the next required action in the status row.
After entering sample ID, the first action is “Add Cuvette”. Depending on
the test setup of the actual test, it is followed by “Add Reagent” or “Incu-
bating”. The time counter shows an orange number during incubation.
When it is finished the actual measurement starts and the time counter
turns to red. After completion of the measurement, your next action is
“Tube Out” and the result immediately appears in the header. The last
result is displayed on the lowest position.