19
Status indicators
– located on the lower part of the screen. Used for
monitoring the status of measurement position
Figure 6.2 - Rear overview
External power supply connector
- GTM41060-182509GTM21097-4509
type power supply unit, with input voltage 100-240V AC, and output vol-
tage.
Master USB connector
– for connecting peripherals. Peripherals, such
as barcode readers or a printers must be connected while the instrument
is off. Unlike other peripherals, USB storage devices may be
connected while the instrument is on; however, a 5-10 second waiting
period is required before any action may be performed on them.
Slave USB connector –
for connecting the instrument to a computer as
an external device.
Only use the original power supply that is packaged
with the instrument. Using a third-party unit may
negatively influence test results and may cause the
instrument to malfunction due to radio frequency
interference.
The size of the pendrive intended to be used with
the instrument must not exceed 16 GBs in size and
must be formatted to FAT32 file system.