Di-LOG DLPT2+, Operating Instructions Manual

Page: 35 / 43

DLPT2+ Operating Instructions
35
4 Memory & Print Functions
The DLPT2+ can store the results for a maximum of
999 appliances.
4.1 Saving Test Results
In order to store a test result press the STORE Key
when the test sequence has been completed. The
results displayed on the LCD will be recorded in
memory. Once the results for a test sequence have
been recorded the STORE Key is disabled until
another test sequence has been performed.
4.2 Viewing Test Results
When the DLPT2+ is waiting to start a new test
sequence press the RECALL Key, this will display
the last recorded results. Other results can be
displayed by scrolling through the memory. To scroll
through the memory use the RECALL and STORE
Keys. Pressing any other Key or waiting for 10
seconds will return the DLPT2+ into test mode.
4.3 Deleting Test Results
To delete all of the results in memory press and hold
the STORE and RECALL keys together while
displaying the recalled results until the counter
reaches zero.
4.4 Transferring Test Results
Test data can be transferred to a PC using the
Datalogger on the provided DLPT2+ Support CD.
Insert the CD into your disc drive and then view the
InstallationInstructions.txt file for information on how
to install.
Once the USB drivers and Datalogger are installed
you can open the Datalogger program from your
desktop.
Connect your device to the PC using a USB
connector. (The very first time you do this, your PC
will automatically install a COM port driver). You can
check which COM port is being used by looking in
the Device manager.