28
A
-
SCAN SCREEN
The A
-
Scan Screen allows the user to perform A
-
Scan procedures and review the loaded
patient
’
s A
-
Scan records
.
Open File:
To view A
-
Scan videos, measurements and records associated with the
current patient, click the
[OPEN FILE]
button in the upper right
-
hand
corner. Load the desired file from the window by double
-
clicking the
corresponding icon.
Measurement Type:
If performing a new measurement, it is necessary to select the
measurement type by marking the
[CONTACT]
or
[IMMERSION]
radio
button.
Measurement Mode:
Measurements can be taken in Manual Mode or Auto Measure Mode.
In Manual Mode, the operator must manually select the measurements
to be entered into the measurement bank and manually stop the scan.
In Auto Measure Mode, measurements that meet alignment criteria will
automatically be entered into the measurement bank, and
measurement will stop once the bank has been populated with
measurements that fall within Standard Deviation requirements. Refer
to the
Alignment Ranking System
section for more information.
To select the measurement mode, mark the
[AUTO MEASURE]
or
[MANUAL MODE]
radio button.
Begin New Scan:
To begin a new scan, click the
[NEW SCAN]
button in the upper right
-
hand corner, to begin scanning click the
[START SCAN]
†
button in the
lower right
-
hand corner. To stop the scan, click the same button. To
switch between the OD and OS, click the
[CHANGE EYE]
†
button.
†
This command may be executed through voice control. Refer to the
A
-
Scan Voice Controls
section.
