18
A
-
SCAN PAGE PREFERENCES
The A
-
Scan Page Preferences allow the user to select the Default Lens Type and Default Report.
Default Lens Type:
This is the lens type that will be entered by default when a new A
-
Scan
procedure is started.
Default Report:
This setting determines what report will be generated when clicking the
[REPORT]
button on the A
-
Scan Page.
B
-
SCAN PAGE PREFERENCES
The B
-
Scan Page Preferences allow the user to adjust image reference, scan speed and scan/
record settings.
Image Reference:
The green line indicates the side of the
image/video that will correspond to the
top position on the probe.
NOTE:
Changing the image reference setting will change the
orientation of the images stored in the database. If this
reference is changed after images have been acquired, any
measurements overlaying the image will need to be redrawn.
Scan Speed:
Determines the number of frames
that are acquired per second during a
scan.
Start Scan Button
The [
START SCAN]
and
[RECORD]
Configuration:
buttons on the B
-
Scan page can be
configured to operate together or
independently.
-
Scan and Record: When the
[START SCAN]
button is clicked to start a
scan, the software will automatically record video. Recording will stop
when the scan is stopped.
-
Scan Only: When the
[START SCAN]
button is clicked, the scan will
start; however, video will not be recorded until the
[RECORD]
button is
clicked. Recording can be toggled on/off as needed during a scan.
