DFI 586ITBD, User Manual

Page: 60 / 89

3
60
586ITBD System Board User’s Manual
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec. Regardless of whether the Power Management field
is enabled or disabled, if the power button is pushed
and released in less than 4 sec, the system enters
the Suspend mode. The purpose of this function is
to prevent the system from powering off in case
you accidentally “hit” or pushed the power button.
Pushing the power button for more than 4 seconds
will power off the system.
Instant-Off Default setting. Pressing and then releasing the power
button will power off the system.
Resume By Ring
Enabled Enables the Modem Ring-on feature. This allows your
system to power-on to respond to incoming calls. Make
sure to select an IRQ channel for the external modem in
the “Modem Use IRQ” field and set JP11according to the
COM port where your modem is connected.
Disabled Disables the Modem Ring-on feature. Your system will not
respond to incoming calls.
Resume By Alarm
Enabled When Enabled, you can set the date and time you would
like the Soft Power Down (Soft-Off) PC to power-on.
“Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm”
will appear right below this field.
Disabled Disables the automatic wake up function. (default)
Date (of Month) Alarm
0 The system will power-on everyday according to the
set time in the “Time (hh:mm:ss) Alarm” field.
1-31 Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
“Time (hh:mm:ss) Alarm” field.